sustainable construction architecture
spacer
spacer spacer
spacer sustainable buildingPrint green constructionContact
spacer
spacer spacer
Holcim Projects spacer
sustainability
spacer
holcim foundation search
spacer
spacer
spacer
spacer
Construction Sustainable

Project update – Coastal fog-harvesting tower, Huasco, Chile

spacersustainable construction
Coastal fog-harvesting tower
On site: the structural model takes shape in an arid landscape. The diagram (right) shows the six sides with four kinds of wooden arms which connect the plastic net skin to the main structure.

holcim foundation

Holcim Awards “Next Generation” 1st prize 2008 Latin America

Project under construction
Overview
A prototype at 1:10 of the full-scale project was completed in February 2010. More data collection and research will take place before full-scale production commences.

Main author

Alberto Fernández González and Susana Ortega Gómez, architects, Santiago, Chile

holcim foundation

Harvesting water from the air

The Huasco region in northern Chile is an agricultural region that depends on water for irrigation from the Huasco River. Water availability has decreased over the last decade, and new solutions have to be found to obtain water on the coast of this desert region. This project intends to use of the “Camanchaca”, a coastal fog originating from the anticyclone of the Pacific and condensing behind the coastline.

The striking ideas consist of towers with a height of 200m catching the water particles and conducting them to the base of the tower, where the liquid will be filtered through a reverse osmosis process to eliminate salt. The tower is constructed as a spiral structure with a wooden base, copper mesh providing conduits and a plastic skin. The water catching system only uses wind energy and gravity in its principal working process.


Coastal fog-harvesting tower
Construction continues: the wooden structure in January 2010 is covered with the rain harvesting skin by April 2010.

Prototype yields knowledge – and water
A 15m prototype tower was built in February 2010 to collect more data from the low cost model scaled at 1:10 compared to the final concept. Using the same mechanics for vertical fog harvesting the prototype delivered superior performance in comparison to traditional horizontal fog catching models.

The prototype has a surface area of 71m2 rolled onto a triangular wooden structure with greater structural integrity. In keeping with the low-tech/high-impact aims of the project, the prototype was constructed on a hill 460m above sea level to verify the structure can support the 50km/h prevailing winds.


Coastal fog-harvesting tower
Illustrating the iconic landmark that the full-scale model shall create, with (right) a top view showing the internal elements of the structure.

Landmark structure
The tower is a striking landmark in its environment, and produces between 140 and 700L of water each day. Following completion of the research phase of the project, pre-fabricated models are planned that will support water demands for communities in extreme geoclimatic conditions.

Picture book of the Mid-Size Coastal Fog Tower (PDF, 2.6MB)

Last updated: 01-Nov-2010

spacer
holcim foundation
holcim foundation
holcim foundation
holcim foundation
spacer
spacer spacer spacerskin element
spacerspacer
spacer
spacer spacer
skin elementImprint & © skin elementLegal skin elementHolcim Ltd spacer skin element spacer skin element
spacer
spacer